Water management of the Litvínov refinery

PROTUR 300

Working water slope from 0.6 m
Minimum required water flow from 35 – 40 l/s
Power 0.3 – 0.6 kW
Daily production 7 – 14 kWh
Basic model or a model with one or two casings for slopes up to a height of 2.2 m
Possibility to install the assembly in one horizontal line using common overflow inlets
Quick installation, minimum construction modifications
High mobility
Minimum requirements for service and maintenance during turbine operation

PROTUR 600

Working water slope from 1 m
Minimum required water flow from 80 – 100 l/s
Power 0.6 – 1.0 kW
Daily production 14 – 24 kWh
Possibility to install the assembly in one horizontal line using common overflow inlets
Quick installation, minimum construction modifications
High mobility
Minimum requirements for service and maintenance during turbine operation

PKN ORLEN refinery plant

– Installation of five PROTUR 300 turbines
– Parallel connection of four turbines and separate installation of the fifth turbine
– Water management of the refinery operation

The generated electricity is intended for the refinery’s own water management consumption. It is a specific installation on a hot water flow and in the operationally hazardous and demanding environment of a refinery. Due to the demands of the refinery operation itself, the entire installation had to be completed within 6 hours.

Back to overview

Industry and energy
Municipalities, villages, cities
Nature
Agriculture

Water management of the Litvínov refinery

Industry and energy

Municipalities, villages, cities

Nature

Agriculture